Edgewood sits on the edge of the Puyallup Valley where older ranch homes and split-levels from the 1960s and 1970s line streets like 112th Street East. Tree roots from mature maples and firs on these larger lots frequently reach sewer laterals, especially after the heavy winter rains that soak Pierce County. Tacoma Hydro Jetting brings the jetter truck straight to these properties and clears the lines without excavation in most cases.
Access can be tight on the sloped driveways common in the North Meridian corridor. Our smaller jetting rig fits where larger equipment cannot, letting us work between parked cars and fences without tearing up lawns. Wet winters here turn small grease or scale restrictions into full blockages fast, so same-day hydro jetting keeps basements dry in neighborhoods that sit lower than the main collector lines.
Homeowners along 20th Street East and near the Edgewood Town Center often call after noticing slow drains that worsen during the cool, damp months. We flush the entire line at 4,000 psi, cutting through root masses and flushing out decades of buildup that standard snaking leaves behind.
Around Edgewood
We regularly work near:
- 📍112th Street East
- 📍Meridian Avenue East
- 📍Edgewood Town Center
- 📍Puyallup River Trail access at 20th Street East
- 📍Bradley Lake Park
Sewer Hydro Jetting in Edgewood — Local Notes
- •Edgewood lots often back up to greenbelts or ravines where cedar and maple roots travel long distances to reach clay or cast-iron laterals installed before 1980.
- •Winter water table rise in the lower sections near the Puyallup River pushes groundwater into any cracked joints, so hydro jetting is paired with camera inspection to spot repeat failure points.
- •Narrow side yards and steep driveways off Meridian Avenue limit equipment size; the compact jetter unit we keep at 403 Broadway reaches these spots without street parking issues.
- •Summer dry spells followed by sudden fall rains send heavy sediment loads into laterals from the valley floor, creating recurring clogs that only high-pressure jetting fully removes.